Silverstone 6 Single Seater - 3" Shoulder & 2" Lap

• Suitable for Single Seater and GT Cars with appropriate mountings.
• Six strap body harness with six vehicle attachment points using 5/16” (8mm) diameter bolt fixings for all mountings.
• All shoulder straps are 3" (75mm) wide.  Lap straps are 2" (50mm) wide webbing with 3" (75mm) wide load spreader pad.  Crutchstraps are 2" (50mm) wide with 1" (25mm) wide loop one end to be passed through the ‘D’ rings on the lap straps before passing the shoulder strap down through the loop prior to connecting into the release mechanism (see photo)
• All straps fully adjustable.  3" (75mm) shoulder straps use Willans own aluminium alloy adjuster, 50mm lap straps and crutch straps use double steel attachment lugs to give pinch plate spanner adjustment for control of wearer straps.
• Crutch straps are designed to stop driver submarining through the harness in high ‘g’ decelerations.
• A Willans aircraft type rotary multi-point quick release mechanism is used for central fastening. Shoulder and lap straps connect individually to the release mechanism, except the right-hand lap strap which is permanently fixed.
• Can be supplied with shoulder upper looped & sewn or with 3/8” (9mm) or 7/16” (11mm) diameter bolt mounting.

Harness approved, in both 3" (75mm) shoulder and lap or 3" (75mm) shoulder and 2" (50mm) lap, to FIA standard 8853/98

Can be supplied in 3" (75mm) shoulder and 3" (75mm) lap to SFI 16.1 Approval if specified at time of ordering.

Supplied with fitting instructions. Bolts for mounting not supplied.

Available in the following colours (Please note: Silver is not available from stock, only as a special order):