Silverstone 4 x 4 Caterham - 3" Shoulder & 2" Lap

• Suitable for saloon cars
• Four strap body harness with four vehicle attachment points using snap hook and eye bolt mounting.
• All shoulder straps are 3" (75mm) wide.   Lap straps are 2" (50mm) wide webbing with 3" (75mm) wide load spreader pad.
• All straps fully adjustable.  2" (50mm) lap straps using aluminium alloy adjusters. All shoulder straps use Willans own aluminium alloy adjuster for control of wearer straps. Harness can be supplied with aluminium alloy adjusters on the shoulder straps only and Willans own steel adjusters on the lap straps.
• A Willans aircraft type rotary multi-point quick release mechanism is used for central fastening. All straps connect individually to the release mechanism, note, one lap strap is permanently fixed to either left-hand or right-hand lap strap so that when in unlocked position release mechanism falls to centre of the vehicle.

Can be supplied with shoulder upper looped (click here for photo)

Harness approved, in both 3" (75mm) shoulder and lap or 3" (75mm) shoulder and 2" (50mm) lap, to FIA standard 8854/98

Can be upgraded using either a ‘V’ or a ‘T’ type plug-in crutch strap to comply with FIA standard 8853/98

Can be supplied in 3" (75mm) shoulder and 3" (75mm) lap to SFI 16.1 Approval if specified at time of ordering.

Supplied with fitting instructions and eye bolts.

Available in the following colours (Please note: Silver is not available from stock, only as a special order):