Club T6 - 3" Shoulder & 3" Lap

• Suitable for saloon and GT cars with appropriate mountings.
• Six strap body harness with six vehicle attachment points using snap hook and eye bolt mounting.
• All shoulder straps are 3" (75mm) wide. Lap straps are 3" (75mm) wide. ‘T’ crutch straps are 2" (50mm) wide.
• All straps fully adjustable.  3" (75mm) lap straps and all shoulder straps use Willans own anti-creep adjuster for control of wearer straps. Crutch straps are adjustable for individual drivers using 3 bar locker.
• Crutch straps are designed to stop driver submarining through the harness in high ‘g’ decelerations. These connect to the release mechanism by inserting crutch tongue into the 5^th (lower) slot of the release mechanism.
• A Willans aircraft type rotary multi-point quick release mechanism is used for central fastening. Shoulder, lap and crutch straps connect individually to the release mechanism.  Note:- one lap strap is permanently fixed to either left-hand or right-hand lap strap so that when in unlocked position release mechanism falls to centre of the vehicle.

Can be supplied with shoulder upper looped (click here for photo)

Harness approved, in both 3" (75mm) shoulder and lap or 3" (75mm) shoulder and 2" (50mm) lap, to FIA standard 8853/98

Can be supplied in 3" (75mm) shoulder and 3" (75mm) lap to SFI 16.1 Approval if specified at time of ordering.

Supplied with fitting instructions and eye bolts.

Available in the following colours (Please note: Silver is not available from stock, only as a special order):