SRL Spec 338 Issue 7

• Suitable for Nascar
• Six strap body harness with six vehicle attachment points with short looped and sewn shoulder upper and 3/8” diameter bolt mountings for lap and crutch.
• Both shoulder and lap straps are 3” wide webbing, crutch straps are 2” wide with 1” wide loop one end to be passed through the ‘D’ rings on the lap straps before passing the shoulder strap down through the loop prior to connecting into the release mechanism (see photo)
• All straps fully adjustable, 3” shoulder straps use Willans own aluminium alloy adjuster. 3” Lap straps and 2” crutch straps use double steel attachment lugs to give pinch plate spanner adjustment for control of wearer straps.
• Crutch straps are designed to stop driver submarining through the harness in high ‘g’ decelerations.
• A Willans aircraft type rotary multi-point quick release mechanism is used for central fastening. Shoulder and lap straps connect individually to the release mechanism.
• Note: The right-hand lap strap is permanently fixed to release mechanism.
• Can be supplied with 7^th strap which plugs in to the 5^th (lower) slot in the release mechanism (please advise if required)

Harness SFI 16.5 approved

Supplied with fitting instructions. Bolts for mounting not supplied.

Available in the following colours: